| Home | Regelafsluiters & klepstandstellers | Tel. +31 174 280 371 | ||
| Fax. +31 174 280 853 | |||
| info@pandid.nl | |||
 |
Council Directive 97/23/EC |
Council Directive 94/9/EC |
PED
ATEX
All control
valves can be execute with electrical, pneumatic actuators or with several
valve positioners.
 |
The
Valve of this series have globe type single seated body with straight
connections, situable for liquid, steam, vapour and gas service. Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
 |
 |
The
V100 single seated ON-OFF valves are equipped of two-way body with
in-line straight connections. The actuator action should be direct
(air to close), or reverse (air to open). It could be feed directly
by air pipe network from 6 to 10 bar Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
The
heavy duty valves of this series have globe type single seated body
with straight connections, suitable for flow control fo liquids, steam,
vapours and gases in industrial process. Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
The
K100 single seated ON-OFF valves are equipped of two-way body with
in-line straight connections. The actuator action should be direct
(air to close), or reverse (air to open). It could be feed directly
by air pipe network from 6 to 10 bar.The K100 valves has been designed
to assure an accurate control in any process condition. Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
-
Single seated control valves, with fully bealanced inner valve, from
DN15 to DN200 either of cast iron or cast steel or cast stainless
steel - Single seated control valves, with inner cage for noise limitation in case of high pressure drops - Special valves Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
 |
 |
The
heavy duty valves of this series are available in both versions
for mixing service and diverting service suitable for flow control
of liquids in industrial process. Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
The heavy duty valves of this series are available in diverting service suitable for flow control of liquids in industrial process.The actuator action should be direct (air to close), or reverse (air to open). It could be feed directly by air pipe network from 6 to 10 bar.
Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
Control valve for food processing, chemical and cosmetic industry. The valve body is made in stainless steel and special care it taken to avoid dead spots. The clamp type cupling between the valve body and the intermediate body enables a quick dismounting, which is also ideal for cleaning in place (CIP method).
Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
3 Way
divert valve is used to deviate the passage fluid. This valve is
use in industrial sector such the food, pharmaceutical, chemical
and cosmetic where the high hygienity is one of the essential characteristics.
The regulation sistem is a shutter that can be linear or equipercentage.
The seal system can be metallic or with soft insert to give perfect
seal. Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. |
|
 |
Single & double-acting pneumatic or electronic positioners require an input signal of 3÷15 psi or 4÷20 mA for proportional control actuator. The Positioner compares the output signal from a controller with the position feedback, and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential pressure. Version II 2 G D c IIC X (Council Directive 94/9/EC "ATEX") are available. Intrinsic safety version II 1 G EEx ia IIC T6, T5 (Council Directive 94/9/EC "ATEX"). |
|